CoolAir RT 780, SP 950T
2.2
Elledningar
• Använd tomma rör eller kabelgenomföringar om ledningarna ska dras
genom väggar med vassa kanter!
• Lägg inte ledningarna löst eller med skarpa böjar på elektriskt ledande
material (metall)!
• Dra inte i ledningarna!
• Dra och fäst ledningarna så att man inte kan snubbla över dem och så att de
inte kan skadas.
• Elanslutningarna får endast utföras av behörig elektriker.
• Säkra anslutningen till fordonsnätet med 25 ampere.
• Dra aldrig spänningskabeln (batterikabel) i närheten av signal- eller
styrkablar.
3
Målgrupp
The mechanical and electrical installation and setup of the device has demon-
strated skill and knowledge related to the construction and operation of auto-
motive equipment and installations, and who is familiar with the applicable
regulations of the country in which the equipment is to be installed and/or
used, and has received safety training to identify and avoid the hazards invol-
ved.
4
Intended use
The parking cooler is used to supply the interior of the driver cab with cool and
dehumidified air.
The parking cooler is designed for stationary use. It can be used while driving.
The parking cooler is not suitable for installation in construction machines, agri-
cultural machines or similar equipment. They will not work properly if exposed to
strong vibrations.
The parking cooler must not be installed in or instead of roof hatches that are
intended or declared as emergency exits.
This product is only suitable for the intended purpose and application in accor-
dance with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operation or main-
tenance will result in unsatisfactory performance and a possible failure.
SV
Målgrupp
153