Målgruppe
• Afbryd alle forbindelser til strømforsyningen, når du arbejder (rengøring,
vedligeholdelse osv.) på standklimaanlægget!
2.2
Omgang med elektriske ledninger
• Hvis ledninger skal føres gennem vægge med skarpe kanter, skal du
anvende tomme rør eller ledningsgennemføringer!
• Træk ikke ledninger løst eller med skarpe knæk ved elektrisk ledende
materialer (metal)!
• Træk ikke i ledninger!
• Fastgør og træk ledningerne, så der ikke er fare for at falde over dem og en
beskadigelse af kablet er udelukket.
• Den elektriske tilslutning må kun foretages af fagfolk.
• Sørg for at sikre tilslutningen til nettet i køretøjet med en sikring på
25 ampere.
• Træk aldrig spændingsforsyningsledningen (batterikabel) i nærheden af
signal- eller styreledninger.
3
Målgruppe
The mechanical and electrical installation and setup of the device has demon-
strated skill and knowledge related to the construction and operation of auto-
motive equipment and installations, and who is familiar with the applicable
regulations of the country in which the equipment is to be installed and/or
used, and has received safety training to identify and avoid the hazards invol-
ved.
4
Intended use
The parking cooler is used to supply the interior of the driver cab with cool and
dehumidified air.
The parking cooler is designed for stationary use. It can be used while driving.
The parking cooler is not suitable for installation in construction machines,
agricultural machines or similar equipment. They will not work properly if expo-
sed to strong vibrations.
The parking cooler must not be installed in or instead of roof hatches that are
intended or declared as emergency exits.
This product is only suitable for the intended purpose and application in accor-
dance with these instructions.
136
CoolAir RT 780, SP 950T
DA