3.
Starting a Création cooking
When you start with a cold oven, place your dish inside it and proceed with the following settings:
Turn knob A towards the right until the display indicates COOKING,
•
•
Turn knob B until the display indicates the function corresponding to the chosen cooking mode,
•
Press knob B to confirm the function.
If you want to start with a pre-heated oven, wait until pre-heating is complete (a series of beeps will sound) and then
place your dish in the oven.
For example:
4.
Adjusting the temperature
The temperature is pre-set for each cooking. You can adjust the temperature at any time during cooking:
Turn knob A towards the right until the display indicates TEMPERATURE,
•
•
Turn knob B until the display indicates the desired temperature,
•
Press knob B to confirm the adjustment.
NOTE
During the pre-heating process, the display indicates PREHEATING IN PROGRESS and during cooking, COOKING
IN
PROGRESS.
5.
Turning off the oven
When cooking is complete, turn knob A towards the left to display STOP and then press knob A or knob B.
You may also turn knob A towards the right until STOP is displayed and then press knob A or knob B.
NOTE
If you wish to use the "Dough proving", "Defrosting" functions when the oven is hot, a series of beeps sounding and
the display of OVEN TOO HOT means you cannot place your dish in the oven.
Turn your oven off and try again later.
Création cooking
- 10 -