Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F
,
OR ALL OVENS
PLEASE READ THE CHAPTER ENTITLED
1.
Precautions before pyrolysis
•
Remove the toughest grease and food spots and all substantial spills to avoid the risk of fire or smoke.
•
Remove all oven accessories, the frames and the sliding racks (if present) before running a pyrolysis
cycle. Extremely high temperatures may cause these accessories to become warped or discoloured.
•
Do not place tea towels over the oven handle to dry.
2.
Running a pyrolysis cycle
B
Turn to display the
Turn to display
PYROLYSIS menu
>ECONOMIC<
>NORMAL<,
>INTENSIVE<
3.
Turning off the oven
A series of beeps signals the end of the pyrolytic self-cleaning cycle.
Turn your oven off: turn knob A towards the left to display STOP and then press knob A or knob B. You may also turn
knob A towards the right until STOP is displayed and then press knob A or knob B.
The display indicates
During this time, you are not granted access to cooking (the display indicates AWAITING UNLOCKING).
NOTE
If you do not turn the oven off manually, the same will only turn off after a certain amount of time.
4.
Important notes:
•
Keep young children away from the appliance as the accessible parts of the oven may become hot.
•
Avoid scratching the surface of the enamel coating with sharp objects such as knives, ...
•
Do not use abrasive detergents or products.
•
When cleaning, try to prevent any liquids from leaking into the oven door slots.
After pyrolysis, wait for the appliance to have cooled down completely and then remove the dust deposits which
formed as the food residue burned.
Clean the seals surrounding the oven door manually, as the self-cleaning cycle does not affect these areas.
To cut down on pre-heating times and therefore save on energy, we recommend:
•
you start a pyrolysis cycle straight after cooking,
•
or start cooking immediately after the pyrolysis cycle has been completed (the dust deposits that formed
during the cycle are completely harmless).
When looking through the oven door, you may notice some particles that light up as they are destroyed by pyrolysis
upon contact with the heating elements. This is simply spontaneous combustion: it is perfectly normal and hazard-free.
NOTE
To delay the start of a pyrolysis cycle, proceed in the same way as you would for a Succès cooking.
Pyrolysis
B
B
Turn to select the
Press to confirm
cycle
your choice
for as long as the temperature remains high.
- 16 -
"O
C
"
T
VEN
ARE
IN THE
When the temperature inside the oven exceeds 250°C, the oven door is
locked and a key appears on the display.
The door unlocks automatically when the temperature inside the oven
drops sufficiently: the key symbol is turned off.
Turn your oven off once the pyrolytic self-cleaning cycle has ended.
H
.
ECHNICAL
ANDBOOK
Werbung
Kapitel
Inhaltsverzeichnis
