Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Package contents
1
Package contents
1x Multi IO Box
4x Screws, 4.0 x 40 mm
4x Wall plugs, 6 mm
1x Operating manual
2 Information about this
manual
Please read this manual carefully be-
fore operating your Homematic IP
components. Keep the manual so you
can refer to it at a later date if you need
to. If you hand over the device to other
persons for use, please hand over this
manual as well.
Symbols used:
Important! This indicates a haz-
ard.
Please note: This section contains
important additional information!
3 Hazard information
Do not open the device. It does
not contain any parts that need to
be maintained by the user. In the
event of an error, please have the
device checked by an expert.
For safety and licensing reasons
(CE), unauthorised changes and/
or modifications to the device are
not permitted.
The device may only be used for
fixed installations. The device
must be securely attached within
a fixed installation.
The device may only be operated
in dry and dust-free environment
and must be protected from the
effects of moisture, vibrations,
solar or other methods of heat
radiation, cold and mechanical
loads.
The device is not a toy: do not
allow children to play with it. Do
not leave packaging material lying
around. Plastic films/bags, pieces
of polystyrene, etc., can be dan-
gerous in the hands of a child.
We accept no liability for damage
to property or personal injury
caused by improper use or the
failure to observe the hazard war-
nings. In such cases, all warranty
claims are void. We accept no
liability for any consequential
damage.
The actuator is part of the building
installation. Observe the relevant
national standards and directives
during planning and set-up. Only
qualified electricians (to VDE
0100) are permitted to carry out
work on the 230 V mains. The
applicable accident prevention
regulations must be observed
while such work is being carried
out. To avoid electric shocks from
the device, please disconnect the
mains voltage (trip the miniature
circuit-breaker). Non-compliance
with the installation instructions
can cause fire or introduce other
hazards.
When connecting to the device
terminals, observe the cables and
cable cross-sections permitted for
this purpose.
20
Werbung
