probst SM-1200 Betriebsanleitung Seite 75

2 Basic safety instructions
2.10 Responsibility of the operator
The operator is obliged to carry out a risk assessment for the ambient conditions at the place of use.
The operator is jointly responsible to third parties in the working area of the product. There must be no unclear
responsibilities.
•
The workplace must be adequately lit without glare.
• Ensure that the product cannot be put into operation by unauthorized persons.
•
Ensure that the product cannot be used during maintenance or servicing work.
• Clearly define the responsibilities for the various activities.
•
Ensure compliance with responsibilities.
• Before handling unknown loads, carry out tests to ensure that safe operation is
guaranteed.
2.11 Country-specific regulations for the operator
• Observe the country-specific regulations regarding accident prevention, safety
testing and environmental protection.
• Do not use the lifting device until you have ensured that the carrier device (cra-
ne, construction site vehicle, etc.) with which it is handled complies with the
country-specific regulations and safety regulations.
14 / 53 EN - 30.30.01.04558 - 00 - 09/24