probst SM-1200 Betriebsanleitung Seite 105

9 Maintenance
9 Maintenance
9.1 Security
9.1.1 Safety instructions for maintenance
The appliance may only be installed and maintained by qualified electrical and mechanical specialists.
The personnel must have read and understood the operating instructions.
Before troubleshooting or maintenance work, disconnect the cable from the positive terminal of the
battery to prevent damage to the components due to a short circuit.
WARNING
Risk of injury due to negative pressure!
•
•
WARNING
Unexpected movements
Serious injuries or death!
•
WARNING
Risk of injury due to improper maintenance or troubleshooting
•
CAUTION
Hot surfaces on the vacuum generator
Risk of burns!
•
44
Switch off the vacuum generator before troubleshooting or maintenance work.
Ensure that no stored residual vacuum remains in the vacuum circuit.
Before working on the lifting device, ensure that no crane movement can take place.
Check the proper functioning of the product, especially the safety devices, after each
maintenance or troubleshooting operation.
Allow the vacuum generator to cool down before troubleshooting or maintenance work.
EN - 30.30.01.04558 - 00 - 09/24