probst SM-1200 Betriebsanleitung Seite 107

9 Maintenance
Maintenance activity
Check and clean the sealing lips of the suction pla-
tes, replace if worn (> see section 9.6 Cleaning and
checking the suction plates,
Clean or replace the filter cartridge of the dust filter .
Drain condensation water.
Check the tightness of the vacuum circuit.
Check the condition of the hose connections.
Check load-bearing parts, e.g. suspension, for de-
formation, wear or other damage.
Check the condition of the load securing chain and
the suspension hook.
Check pressure gauge .
Check the function of the warning light.
Check the suspension eye for deformation, wear or
other damage.
Check legibility of type and load plate. Clean if ne-
cessary.
Check legibility of warning signs. Clean if necessary.
Is the inspection sticker up to date? Observe country-
specific regulations.
Check the general condition of the lifting device.
The operating instructions are available, legible and
accessible to personnel.
Check the charge status of the battery.
Check the condition of the battery.
Check the function of the charger.
Check electrical installation and cable glands.
Check electrical vacuum generation.
46
P.50).
weekly. mtl.
month-
X
X
X
X
See operating instructions for the battery.
See operating instructions for the charger.
See operating instructions for the vacuum generator
in the appendix.
3- 6-mtl. annual
ly
X
X
EN - 30.30.01.04558 - 00 - 09/24
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X