Herunterladen Inhalt Inhalt Diese Seite drucken

Low-Battery Voltage Detection - Conrad Comm Mini Bedienungsanleitung

Pmr-funkgerät pocket
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

accessory (not included in delivery). Do not leave the
devices unattended during the charging process.
To make sure the rechargeable batteries are properly charged, they
have to be inserted into the PMR walkie-talkie first (see chapter "9.
Inserting or replacing the rechargeable batteries"). Then connect the
provided wall power supply to the PTT/charger socket (13).
During the charging process, the battery symbol (F) flashes on the
display of the PMR walkie-talkie. As soon as the battery symbol (F)
stops flashing, the rechargeable batteries are fully charged.
Total charging time is between 1 to 8 hours (depend-
ing on the remaining capacity of the batteries).
Note that the PTT button and the CALL button are
inactive during the charging process. The batteries
can be charged with the walkie-talkie switched on or
off. However, if battery voltage is too low, the walkie-
talkie should be switched off.

10.1 Low-battery voltage detection

If low battery voltage is detected, the battery symbol (F) starts
flashing.
When an audio signal is played, you should recharge the batteries
immediately.
If battery voltage is too low, the walkie-talkie will shut down automat-
ically.
The current radio channel as well as the sub-channel are saved and
used when the walkie-talkie is switched on again. The settings will
not be preserved if you remove the rechargeable batteries.
38

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

93 04 66

Inhaltsverzeichnis