MAINTENANCE, SERVICING AND DISMANTLING
8.4.2
Clean cooler
Fig. 10 Clean cooler
Clean the surface with compressed air
The radiator must also be cleaned at regular intervals, as deposits impair the cooling performance. The in-
terval depends on the degree of contamination on the radiator.
The radiator is located behind the fan cowl. Loosen this and blow through the cooling fins at a slight
distance.
Protective goggles and an FFP2 mask in accordance with EN 149:2008 must be worn during cleaning.
Fig. 11 Intake filter
30
|
www.elmorietschle.com © Gardner Denver Schopfheim GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: v-g@prematic.ch