Protective Measures For Users; Information On Residual Risks; Safety Instructions - Elmo Rietschle V Serie Originalbetriebsanleitung

• a set-up in which the pump is subjected to dynamic loads. Please contact Elmo Rietschle Service if you
have any such considerations. In this case, we ask for consultation.
2.7

Protective measures for users

Personal protective equipment must be worn when working on the pump in order to minimise health
hazards.
The protective equipment required for the respective work must always be worn during work.
Instructions on personal protective equipment displayed in the work area must be followed.
WARNING
WARNING
WARNING
Hand protection must be provided by the operator and must be suitable for the activities to be carried out
and comply with the applicable standards (e.g. EN 388:2019-03).
Foot protection must be provided by the operator and must be suitable for the activities to be performed
and comply with the applicable standards (e.g. DIN EN ISO 20345:2020-06).
Hearing protection must be provided by the operator and must be suitable for the noise levels generated
and comply with the applicable standards (e.g. DIN EN 3527:2003-04).
2.8

Information on residual risks

The pump is built in accordance with the current state of the art and recognised safety regulations. When
using the pump, health hazards for persons working directly with the pump and third parties cannot be ruled
out.
2.9

Safety Instructions

The dangers and risks in the respective life phases of the pump are described below. The following hazard
warnings must be observed.
DANGER
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Risk of injury to hands due to crushing, cutting and high temperatures
During all work on the pump, hand protection must be worn in accordance with
the glove schedule.
Risk of injury to feet from crushing and falling objects
Foot protection must be worn during all activities at the pump.
Hearing damage due to high volume
Hearing protection must be worn during activities that must be carried out while
the pump is running.
Danger to life due to electric shock / Personnel qualification
Work and tasks on the electrical system may only be carried out by qualified
electricians who can prove that they have successfully completed a recognised
training course in the relevant specialist field and have been instructed in the
technical features of the pump.
¾ The performance of electrical work, including the simplest auxiliary activi-
ties, is prohibited without exception for persons who do not fulfil the above
conditions.
¾ To perform tasks and activities on the pump's electrical system, work must
be carried out in accordance with the five safety rules according to DIN VDE
0105.
BASIC SAFETY INSTRUCTIONS
www.elmorietschle.com © Gardner Denver Schopfheim GmbH
Tel. 071 918 60 60, Mail: v-g@prematic.ch
9
|