Replacement Of Carbon Filter (Only For Circulating Air Mode) - hanseatic SY-6005B2 Gebrauchsanleitung

Care and Maintenance
4. Once the grease filters 1a are completely dried, insert the grease filters 1a
into the recesses at the rear.
5. Push the lock backwards, press the grease filters 1a up into place and release
the lock. The grease filters 1a click into place.
6. Reestablish the power supply.
The carbon filter is to remove the odours. It must be replaced when the odours

Replacement of carbon filter (only for circulating air mode)

generated by cooking can no longer be sufficiently filtered. If used regularly, the
filter should be replaced approximately every three months.
1. Disconnect the mains plug or isolate at the appropriate main fuse.
2. Push the lock on the grease filters 1a backwards and remove the grease filters
1a carefully downwards.
3. Unscrew the carbon filter 3 from the motor by rotating 90 degrees and
remove. They can be disposed of in the domestic waste.
4. Place the new carbon filters 3 on the motor and attach firmly by rotating
90 degrees.
5. Close the grease filters 1a.
6. Reestablish the power supply.
18
1a
General
3