Equipment Features - hanseatic SY-6005B2 Gebrauchsanleitung

Presenting your extraction hood
– Wall installation/below unit installation

Equipment Features

– Selection of extraction or circulating air mode
– Selection of air outlet at top or bottom
– Three fan stages
– Lighting
– Depending on the model, surface from painted metal/stainless steel and glass
– Replaceable grease filter pad
1. Unpack the appliance and remove all parts, plastic sections, adhesive tape and
Checking is better
foam padding.
2. Check to make sure that the delivery is complete:
– Individual components in accordance with the parts list, Page 7
– Instruction manual
3. If the delivery is incomplete, please contact our ordering department.
4. Check to see whether the appliance has transportation or other visible
damage.
If damage is determined, do not commission the appliance, please inform our
Service-Team. Thereby, state the appliance designation and order number
(refer to "Technical Data", Page 23).
– Carbon filter (required for circulating air mode)
Accessories (not included in the scope of delivery)
– Exhaust air hose (required for extraction mode)
The appliance is for the extraction of vapours, generated when cooking and
Intended use
roasting, above a cooking area in a private household. It is not designed for
commercial use. Before installation and using your appliance, please first carefully
read the safety information and instruction manual. Only thus can you use all
functions in a safe and reliable manner. The operating instructions are based on
the standards and regulations applicable in the European Union. Abroad, also
observe the country-specific guidelines and laws!
Read this instruction manual and the safety instructions
carefully prior to installation and use. This allows you to
Keep all safety information and instructions for the future. Pass on all
guarantee the correct functioning of the appliance.
safety information and instructions to any subsequent users of this
product.
2
Information