Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY TIPS FOR ELECTRIC TOOLS
ATTENTION: In order to avoid electric shock, danger of injury and burning the following
basic safety measures are always to be taken when using electric tools.
Read and observe the notes before using the device. Keep the safety tips in
a safe place.
1.
Take influences of the surroundings into account.
Do not expose electric devices to rain.
Do not use electric devices in damp or wet surroundings.
Do not use electric devices in the vicinity of flammable liquids or gases.
2.
Protect yourself from electric shock.
Do not fix additional rating plates or symbols with rivets or screws.
Use adhesive signs. When working with electric devices avoid
body contact with earthed objects such as pipes, heating appliances, refrigerators etc.
3.
Use the correct tools.
Only use the tools and accessories outlined in the operating instructions.
Do not use the electric device to do work for which it is not intended.
4.
Secure the work piece.
Use gripping devices or vice grips to hold the work piece steady.
It is more securely held than by hand and you can operate the device with two hands.
5.
Do not overload your electric device.
You can work better and more securely in the indicated power range.
6.
Do not use the cable for purposes for which it is not intended.
Do not carry the electric device by the cable.
Do not use the cable in order to pull the plug out of the socket. Protect the cable from heat, oil,
acids and sharp edges.
For working in wet rooms or in the open only use the authorised extension cables with the
corresponding marking.
7.
Avoid unintentional starting.
Ensure that the electric device is switched off before connecting the mains plug.
Do not carry the electric device in such a way as that your finger is on the switch.
Do not use the electric device if the ON/OFF switch does not work perfectly.
8.
Disconnect the mains plug:
• if the device is not in use
• before maintenance of the electric device
• when changing tools
9.
Carefully maintain the electric device. The best and most secure work is guaranteed if you:
• keep the electric device clean
• observe the instructions for greasing, changing the tools and ancillary equipment
• regularly check the connection cable and the extension cable
• have damaged cables repaired by a specialist
• keep hand grips dry, clean and free form oil and fat
• have the electric device examined and cleaned by a specialist after 900 operating hours.
009NP005.DOC
Werbung
Kapitel
Inhaltsverzeichnis
