SPORTSTECH CX630 Benutzerhandbuch Seite 44

is target to determine your heart strength via the measuring. Please do the test as
below:
A. Both your hands hold the pulse sensor to test the pulse, the computer will
display your current pulse value.
B. Press RECOVERY to enter the pulse recovery test and the computer program
will enter the stop status.
C. Keep pulse detecting.
D. Time will count down from 60 seconds to 0 second.
E. When time reaches 0, the test result (F1.0-F6.0) appears on the display.
F1.0=Excellent F2.0=Good F3.0=Fair F4.0=below average F5.0= No Good
F6.0= Poor
F. If the computer does not detect your current heart rate first, pressing
RECOVERY will not enter into pulse recovery test. During the pulse recovery
test, press RECOVERY to exit the test and return to the stop status.
Specifications
Speed KM/H(M/H): showing your current speed. Range: 0.0 99.9 KM/H(MILE/H).
RPM: showing the current rotate per minute. Range : 0 999.
TIME: the accumulative exercise time, range : 0:00 99M59S.
Preset time range is 5:00 99:00. The computer will start to count down from
preset time to 0:00 with average time for each resistance level. When it
reaches to zero, the program will stop and computer alarm. If you do not
preset the time, it will run with one minute decrement each resistance level.
DIST: the exercise accumulative distance. Range : 0.0 99.9 999KM(MILE)
The preset distance range :1.0 99.0 999.
If the preset value is not zero, the distance will count down and when it
reaches 0, the program will stop and the computer will alarm.
If you don't preset the value, the distance will count up.
CALORIE: the exercise accumulative calories burnt. Range : 0.0 99.9 999
the preset calories range :10.0 90.0 990.
If the preset value is not zero, the calorie will count down and when it
reaches 0, the program will stop and the computer will alarm.
If you don't preset the value, the calorie will count up.
PULSE: showing the exercise heart rate value. Range: 30
minute)
RESISTANCE LEVEL: showing resistance level. Range:1
WATT: showing the exercise watt. Rang: 0 999
AGE A : showing the user age when in heart rate control program and the range
is 10~100.
BREAKDOWN DISPLAY
When the computer displays ERROR1, please check if the motor is good and if the
motor wires connect well.
customer's request) with 8 segments display.
240BPM(beat per
8( or 16 depends on