be cool BCP12SK2401QW Gebrauchsanleitung Seite 128

Add device
There are 3 methods to add the device.
3-Blue tooth mode
1.Power on the indoor unit, no need to launch the air conditioner.
2.Click "+" in the upper right corner of the "Home" screen
or tap "Add device" on the room which has no device.
3.Tap the "Air conditioner(BT+Wi-Fi)" logo.
4.Make sure Blue tooth of your smart phone is available.
5.Tap in the upper right corner and choose "Bluetooth"
then follow the comments on the screen to reset the Wi-Fi module
then check "Confirm the blue tooth is reset" and tap"Next".
6.Select one of the found device and tap " +"
7.Input the password of the Wi-Fi which the same as your smart
phone connected, then tap "Next".
8.You can see the percent rate of connecting process,
"PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
<
Add Manually Auto Scan
Air Conditioner Fresh Air Split Air
(BT+Wi-Fi)
Purifier Conditioner
Security Window Type Portable Air
Camera Air Conditioner Conditioner
Swimming
Dehumidifier
Pool H/P
Cancel Help
Bluetooth Search
The search process may take up to
two minutes. Please do not perform
any operations during this time.
Scanning nearby devices...
Next
Cancel AP Mode
Reset the device first. CF Mode Default
Method1:When there is a DISPLAY key on the
AP Mode
remote control, press the DISPLAY key 6 times
in the time of 8 seconds; when there is no
Bluetooth
DISPLAY key on the remote control, press the
ECO key 6 times in the time of 8 seconds until
the device beeps twice and the LCD screen
show CF .
Method2:Press the General key 9 times in the
time of 8 seconds until the device beeps twice
and the LCD screen show CF .
Resetting Devices <
Confirm the device is reset.
Next
Cancel Help
Select Device to Add
Air conditioner
Next
at the same time
WLAN Bluetooth Flashlight Sound
Auto-rotate Huawei Share Airplane Mobile data
mode
Location Screenshot Screen
Recorder
Cancel
Select 2.4 Ghz
Wi-Fi Network and
enter password
If your Wi-Fi is 5GHz, please set it to
bo 2.4GHz.Common router setting
method
2.4 5
GHz GHz
*******
Password
Next
11
Work office
Welcome Home
Set your home location for more
information
All Devices Living Room
Master
No devices
Add Device
Home Me
Cancel CF Mode
Reset the device first.
Method1:When there is a DISPLAY key on the
remote control, press the DISPLAY key 6 times
in the time of 8 seconds; when there is no
DISPLAY key on the remote control, press the
ECO key 6 times in the time of 8 seconds until
the device beeps twice and the LCD screen
show CF .
Method2:Press the General key 9 times in the
time of 8 seconds until the device beeps twice
and the LCD screen show CF .
Resetting Devices <
Confirm the device is reset.
Next
<
Add Device
Device added
successfully
Sample1
Living Ro... Master Be... Second B...
Dining R... Kitchen Study Ro...
Done
...
Rename the
device
Select the
location room