be cool BCP12SK2401QW Gebrauchsanleitung Seite 127

Add device
There are 3 methods to add the device.
2-AP mode
1. Power on the indoor unit, no need to launch the air conditioner.
2. Click "+" in the upper right corner of the "Home" screen
or tap "Add device" on the room which has no device.
3. Tap the "Air conditioner(BT+Wi-Fi)" logo.
4. Tap in the upper right corner and choose "AP Mode"
then follow the comments on the screen to reset the Wi-Fi module
then check "Confirm the device is reset" and tap"Next".
5. Input the password of the Wi-Fi which the same as your smart
phone connected, then tap "Next".
6. Read the instruction carefully and tap "Connect now".
7. In the network setting screen, select "SmartLife-****", and tap"
8. You can see the percent rate of connecting process,
"PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
<
Add Manually
Auto Scan
Air Conditioner
Fresh Air Split Air
(BT+Wi-Fi) Purifier Conditioner
Security Window Type
Portable Air
Camera Air Conditioner Conditioner
Swimming
Dehumidifier
Pool H/P
<
Connect phone to device s
wifi hotspot
1.Please connect your phone to the hotspot
shown below
12:30
Wi-Fi
<
SmartLife-XXXX
Home
5G
Guest
4G
2.Return to this app and continue adding
devices
Connect now
Confirm hot spot connecton,next
Cancel AP Mode
CF Mode Default
Reset the device first.
Method1:When there is a DISPLAY key on the
AP Mode
remote control, press the DISPLAY key 6 times
in the time of 8 seconds; when there is no
Bluetooth
DISPLAY key on the remote control, press the
ECO key 6 times in the time of 8 seconds until
the device beeps twice and the LCD screen
show AP .
Method2:Press the General key 9 times in the
time of 8 seconds until the device beeps twice
and the LCD screen show AP .
Resetting Devices <
Confirm the device is reset.
Next
<
WLAN
AVAILABLE NETWORKS
WIFI1
SmartLife-****
office wifi
<
".
at the same time
Cancel AP Mode
Reset the device first.
Method1:When there is a DISPLAY key on the
remote control, press the DISPLAY key 6 times
in the time of 8 seconds; when there is no
DISPLAY key on the remote control, press the
ECO key 6 times in the time of 8 seconds until
the device beeps twice and the LCD screen
show AP .
Method2:Press the General key 9 times in the
time of 8 seconds until the device beeps twice
and the LCD screen show AP .
Resetting Devices
<
Confirm the device is reset.
Next
Cancel
Adding device...
Ensure that the device is powered on.
2%
Scan Register on Initialize the
devices. Cloud. devices.
10
Work office
Welcome Home
Set your home location for more
information
All Devices Living Room Master
No devices
Add Device
Home Me
Cancel
Select 2.4 Ghz
Wi-Fi Network and
enter password
If your Wi-Fi is 5GHz, please set it to
bo 2.4GHz.Common router setting
method
2.4 5
GHz GHz
*******
Password
Next
<
Add Device
Device added
successfully
Sample1
Living Ro... Master Be... Second B...
Dining R... Kitchen Study Ro...
Done
...
enter password
Rename the
device
Select the
location room