13. Faults / 14. Dismounting, return and disposal
EN
14. Dismounting, return and disposal
14.1 Dismounting
Only disconnect the resistance thermometer once the system has been
depressurised!
14.2 Return
When returning the instrument, use the original packaging or a suitable
transport packaging.
44
CAUTION!
If faults cannot be eliminated by means of the measures
listed above, the instrument must be shut down immediately,
and it must be ensured that signal is no longer present, and
it must be prevented from being inadvertently put back into
service. In this case, contact the manufacturer.
If a return is needed, follow the instructions given in chapter
14.2 "Return".
WARNING!
Residual media in dismounted instruments can result in a
risk to persons, the environment and equipment.
Take sufficient precautionary measures.
WARNING!
Risk of burns!
Let the instrument cool down sufficiently before dismounting it!
During dismounting there is a risk of dangerously hot media
escaping.
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind
of hazardous substances (acids, bases, solutions, etc.).
WIKA operating instructions models TR31-3, TR31-K (Ex i)