Gastroback EASY JUICER FUN Bedienungsanleitung Seite 42

container onto the drive shaft coupling. Then turn the filter basket, until it settles down
and press the filter basket further down, until it engages on the drive shaft coupling
with a click.
Place the cover onto the pulp container with the arrow on the lower brim of the cover
aligned exactly over the arrow on the upper brim of the pulp container. The cover
engages onto the pulp container, when it is assembled correctly.
Fold the two locking arms upwards and hook the locking arms into the protrusions
of the cover. Then lock the locking arms by pressing the lower end of the locking
arms without violence into the motor base. The cover must be locked stable onto the
pulp container now.
Tip: If you cannot lock the locking arms, the cover or pulp container are not assem-
bled correctly. Try again observing the position of the arrows on the parts.
Put the pusher into the feed chute. This can only be done in two orientations.
Ensure that the drip-stop spout of the juice outlet is in the open position with the pro-
trusion facing downwards.
Place the juice jug under the juice outlet. Then close the juice jug with the lid.
However, you may place any other suitable container under the juice outlet.
The appliance is now ready for operation.
Proceed reversely for removing the individual parts.
TIP:
42