Care And Cleaning; Disassembling The Appliance - Gastroback EASY JUICER FUN Bedienungsanleitung

CARE AND CLEANING

WARNING: Always unplug the appliance, before moving, disassembling, or
cleaning the appliance. Do not hold your hands or any foreign objects into
the feed chute, into the filter basket or on the coupling on the motor base
with the appliance still connected to the power supply.
The blades at the bottom of the filter basket are very sharp
of the filter basket are made of a fine sieve. Always handle the filter basket with
caution to avoid injuries and damage. Do not touch the blades with your fingers.
Do not use abrasive cleaning agents or aggressive liquids (e.g. bleach, solving
agents) for cleaning the appliance or any part of it, to avoid damage to the sur-
faces. Do not use any hard or sharp-edged objects for cleaning (e.g. scoring pads,
knives, scrapers). Do not immerse the motor base or the power cord in water or any
other liquid. Do not spill or drip any liquids on or in the motor base or power cord
to avoid risk of fire and electric shock.
DO NOT clean the motor base or power cord in an automatic dishwasher.
DO NOT dry the plastic parts via a heat source (e.g. stove, oven) to avoid
distortion. Do not use violence!
The removable parts may be cleaned in an automatic dishwasher: pulp container,
cover of the pulp container, filter basket, pusher, juice jug, and lid of the juice jug.
If possible, place these parts on the top rack for cleaning.
In general, you should avoid to leave any food dry on the parts of the appliance
after processing. This way, you can keep the appliance hygienically clean.
Some fruits may discolour the accessories. This will not affect the functions of the
appliance. Usually, the discolouration will disappear with time.

DISASSEMBLING THE APPLIANCE

1. Always unplug the appliance before disassembling.
2. Carefully remove the juice jug to ensure not to spill the content. Take out the
pusher.
3. Pull the lower end of the locking arms out and fold the locking arms downward.
Then remove the transparent cover.
4. Grasp the filter basket at opposite sides on the upper brim and pull it upwards.
You will notice some resistance when doing so.
5. Lift the pulp container upwards to remove it from the motor base.
and the walls
47