Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Workout Area
The Power Tower has a training area
with a diameter of 2.5 m (marked by the
inner circle).
Around the Power Tower, an area with a
diameter of at least 3.1 m must be kept
clear (marked by the outer circle).
Freestanding training equipment must
be set up on a stable surface and set up
horizontally.
ø
2,5 m
ø
3,1 m
Cleaning
Risk of damage!
Improper handling of the Power Tow-
er may result in damage to the Power
Tower.
• Avoid any aggressive cleaning agents,
brushes with metal or nylon bristles, or
any sharp or metallic cleaning objects
such as knives, hard spatulas or simi-
lar. This can damage the surfaces.
• Wipe the Power Tower and all handles
with a cloth after each workout to pre-
vent contamination from dry sweat.
• Wipe off dirt and dust with a soft,
slightly damp cloth.
• Wipe all parts completely dry after-
wards.
Maintenance
• Check the Power Tower regularly for
any damage or signs of wear and
tear.
• Check the tightness of all screws and
connections.
• Replace defective parts immediately
via our customer service. Do not use
the Power Tower until it has been
repaired.
• Note that sweat has a corrosive effect
and must not come into contact with
the appliance. Wipe sweat drops from
the Power Tower after the exercises.
Storage
All parts must be completely dry before
storage.
• Always keep the Power Tower in a dry
place.
• Protect the Power Tower from tempe-
rature fluctuations.
• Store the Power Tower where it is inac-
cessible to children, securely locked.
Technical information
Model: IAN 433566
Type No.: 73775768
Standard: EN ISO 20957-1:2013
Max. user weight: 150 kg
Device weight: 40 kg
Dimensions: 116 x 88 x 215 cm
Disposal
Disposing of packaging
Dispose of the packaging according to
type. Dispose of paperboard cardboard
as waste paper, place foils in the recycla-
ble material collection.
Disposal of Power Tower
Dispose of the Power Tower in accordan-
ce with the laws and regulations applica-
ble in your country.
IAN: 433566
Service
E-Mail: bevaform-service-en@sertronics.de
EN
45
Werbung
