Electrical Connection - EBARA EGO WB Einbau- Und Betriebsanleitung

9 Electrical connection

Caution! Danger to life!
Improper assembly and improper electrical connection can be life-threatening. Hazards due to
electrical energy must be excluded.
• Assembly and electrical connection may only be perfromed by qualified personnel and in
accordance with the aplicable regulations (e.g. IEC, VDE etc.)!
• The type of current and voltage must comply wih the specifications on the type plate.
• Observe the regulations of the local energy suppliers!
• Observe the accident prevention regulations!
• Never pull on the mains cable.
• Do not bend the cable.
• Do not place any objects on the cable
• When using the pump in systems with temperature above 90°C, an appropriately
heat-resistant connection cable must be used.
• There is a danger of personal injuries due to sharp edges or burrs during performing of
assembly works
• Never transport the pump by carrying it by the mains cable.
• There is a danger of personal injuries due to dropping the pump.
Translation of the original installation
WITA go.future Z
and operating instructions
EN
29
25