Safety Instructions - EBARA EGO WB Einbau- Und Betriebsanleitung

Translation of the original installation
and operating instructions

2 Safety instructions

EN
2.1 General
These installation and operating instructions are a part of the
product, and contain basic information that must be observed
during installation, operation and maintenance. For this reason
it must be read by the installer and the responsible qualified
personnel or the operator before performing assembly works.
Not only the general safety instructions mentioned in point 2
must be observed, but also the special safety instructions
mentioned in the other sections.
A copy of the EU Declaration of Conformity is provided with
these instructions. In case of modification, which has not been
agreed with us beforehand, the declaration loses its validity.
2.2 Labelling of symbols in the operating instructions
20
16
WITA go.future Z
General danger symbol
Warning! Danger of personal injury!
The exisiting regulations for accident
prevention must be observed.
Warning! Danger due to electrical
voltage! Danger due to electrical energy
must be excluded. Observe
the instructions in local or general
regulations (e.g. IEC, VDE etc.) and
those of the local energy suppliers.