Safety Information - Scheppach BAB150-40Li Original Bedienungsanleitung

The equipment may be used only for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the manu-
facturer will be liable for any damage or injuries of any
kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.
Remaining hazards
The machine has been built using modern technolo-
gy and in accordance with recognized safety rules.
Some hazards, however, may still remain.
• Wear regulation safety gear such as safety boots
and tight work clothing.
• Electrical hazards exist when unsuitable electric
connections are used.
• Although having regarded all considerable rules
there may still remain not obvious remaining
hazrds.
• Minimize remaining hazards by following the in-
structions in "Safety Rules", "Use only as author-
ized" and in the entire operating manual.

5. Safety information

We have marked points in these operating instruc-
tions that impact your safety with this symbol: m
Furthermore, the operating manual contains other
important text sections that are marked with the word
"ATTENTION!".
m DANGER
A failure to observe these instructions poses an ex-
treme danger of death or the risk of life-threatening
injuries.
m WARNING
A failure to observe these instructions poses a dan-
ger of death or the risk of serious injuries.
m CAUTION
A failure to observe these instructions poses a minor
to moderate risk of injury.
m NOTE
A failure to observe these instructions poses a risk of
damage to the device or other property.
16 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
m WARNING! Read all safety directions and in-
structions. Omissions in the compliance with safe-
ty directions and instructions can cause electrical
shock, fire and/or severe injuries. Retain all safety
directions and instructions for future use. Read these
instructions before using the charger and follow them:
• operating instructions provided,
• rules and regulations for accident prevention appli-
cable to the operating site.
This gardening tool is not intended for use by peo-
ple (including children) with limited physical, sensory
or mental abilities or with a lack of experience and/
or lack of knowledge, unless they are supervised by
a person responsible for their safety or they receive
instructions from such a person on how to use this
gardening tool.
Never let children or people unfamiliar with these in-
structions use this gardening tool. Children must be
supervised to ensure that they do not play with the
device.
Safety notices for the charger
m WARNING! Carefully read all safety notices
and instructions. Failure to comply with safety no-
tices and instructions can cause electric shock, fire
and/or severe injuries.
Store all safety notices and instructions for fu-
ture reference.
The term "power tool" used in the safety instructions
refers to mains-powered tools (with a mains cable)
and to battery-powered tools (without a mains cable).
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
Iiquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
Electrical safety
• The electrical tool's connection plug must fit
into the socket. The plug may not be modified
in any way. Do not use an adaptor plug togeth-
er with earthed electric tools. Unmodified plugs
and suitable sockets reduce the risk of an electric
shock
• Avoid body contact with earthed surfaces,
such as pipes, heaters, ovens and refrigera-
tors. There is an increased risk of electric shock if
your body is earthed.
• Keep electric tools away from rain and mois-
ture. Water entering an electric tool increases the
risk of an electric shock.