Operation - EuroLite LED KLS LASER BAR Bedienungsanleitung

7

OPERATION

The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version followed by the last operating mode. The light
set may be controlled via IR remote control, foot switch or a DMX controller. The operating modes can be
selected by means of the display and the control buttons.
► Operating Buttons
MENU
ENTER
UP
DOWN
► Menu Structure
Operating Mode
Aut Automatic Mode
Derbies and Spots
Laser
Strobe LEDs
Derbies, Spots,
Laser and
Strobe LEDs
Sou Sound Control
Derbies and Spots
Laser
Strobe LEDs
Derbies, Spots,
Laser and Strobe LEDs
Col Color Mode
Derbies, Spots and
Strobe LEDs
dПH DMX Mode
Start Address
Channel Mode
Start Address
SLA Master/Slave Mode
Mode
Notes: (1) Approx. 30 seconds after pressing the last button, the setting menu is automatically exited.
(2) SLAV or d*** modes: If no control signals are available, the display will be flashing.
(3) While menu Menüs AutP, AutL, AutF, AutM, SouP, SouL, SouF or SouM is selected, all LEDs and the
laser are switched off; in the sub menus they will be switched on again.
www.eurolite.de
Selects the operating mode or returns to the initial screen.
Activates a value to be modified or saves a value when modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Programming Levels
AP01—AP18
AutP
S.01 — S.99
M.00 — M.99
AL01—AL06
AutL
S.01 — S.99
M.00 — M.99
AF01—AF10
AutF
S.01 — S.99
AM01—AM03
AutM
S.01 — S.99
SouP SP01—SP18
SouL SL01—SL06
SouF SF01—SF10
SouM SM01
R.000—R.255
G.000—G.255
CoLo
B.000—B.255
S.00 —S.99
d***
03CH
05CH
09CH
27CH
d001—d***
SLAV
Show program 1-18
Running speed slow → fast
Rotation (Derbies) slow → fast
Show program 1-6
Running speed slow → fast
Rotation slow → fast
Show program 1-10
Running speed slow → fast
Show program 1-3
Running speed slow → fast
Show program 1-18
Show program 1-6
Show program 1-10
SM03 Show program 1-3
—
Red 0-255
Green 0-255
Blue 0-255
Strobe effect slow → fast
Start address (read only
3 channels
5 channels
9 channels
27 channels
Start address
Slave mode
33
Function
)