Installation; Overhead Rigging - EuroLite LED KLS LASER BAR Bedienungsanleitung

5

INSTALLATION

Always set up and install the unit so that a minimum distance of 1 m is kept between the laser
light and the audience.
The use of controls, adjustments, or performance of procedures other than what is
specified herein may result in hazardous radiation exposure.

Overhead Rigging

Mounting clamp
Fixation screws
This product is designed for overhead rigging to a wall or ceiling with the mounting brackets. If necessary, it
can also be fastened to a truss using appropriate clamps.
To align the unit, release the fixation screws at the mounting brackets, adjust the desired inclanation angle
and retighten the fixation screws. Make sure not to point the laser beams at highly reflective surfaces such
as mirror balls, windows and shiny objects. As a precaution, remove or cover up highly reflective objects in
order to avoid laser reflections.
www.eurolite.de
DANGER LASER RADIATION!
CAUTION!
28
Mounting clamp