Operation Without External Control - EuroLite LED KLS LASER BAR Bedienungsanleitung

► Menu Structure (Continued)
System Settings
SYS

Operation without External Control

► Automatic Mode
In automatic mode, 37 show programs are available that run at an adjustable speed.
1
Press the button MENU so many times until the desired program mode is indicated in the display:
AutP = derbies and spots, AutL = laser, AutF = strobe LEDs or AutM for a combination of all light
effects.
2
Use the buttons UP and DOWN to select the number of the desired program.
3
Confirm with the ENTER button. The display indicates menu item running speed.
4
Use the buttons UP and DOWN to adjust the running speed of the program from S.01 (slow) to S.99
(fast).
5
Confirm with the ENTER button. The display indicates menu item rotation.
6
Use the buttons UP and DOWN to adjust the derby rotation from M.00 (slow) to M.99 (fast).
7
Confirm with the ENTER button.
► Sound control
Via the microphone, which is integrated in the control unit the light set can perfectly reproduce the 37 show
programs to the rhythm of the music (sufficient bass provided).
1
Press the button MENU so many times until the desired program mode is indicated in the display:
SouP = derbies and spots, SouL = laser, SouF = strobe LEDs or SouM for a combination of all light
effects.
2
Use the buttons UP and DOWN to select the number of the desired program.
3
Confirm with the ENTER button.
4
Adjust the microphone sensitivity to the volume of the music with the control SENSITIVITY. The LEDs
and the laser do no light if the volume is too low or if there is no sufficient bass beat.
► Individual Color Settings
In the color mode CoLl the white strobe LEDs light and the derbies and spots light constantly in red, green
and blue. It is possible to adjust the flash frequency of the strobe LEDs and the brightness of the derbies and
spots.
1
Press the button MENU so many times until CoLo is indicated in the display.
2
Press the button ENTER. Now the display indicates the letter R for the color and the corresponding
brightness value.
3
Use the buttons UP and DOWN to adjust the desired brightness.
4
Confirm with the ENTER button. Now the color green can be adjusted; then blue.
5
The stetting of the strobe LEDs is the final menu item. Use the buttons UP and DOWN to select the
number of the desired flash frequency from S.01 (slow) to S.99 (fast).
www.eurolite.de
AddS 1234
LEDS
TEST
REST
_
H-En
Rearranges the order of derbies and spots
Energy-saving mode
30-second test mode (automatic mode or sound
controlled mode if a music signal is available) for
the LEDs. Check IR remote control with ON/OFF
and foot switch with BLACKOUT. All LEDs light
at full brightness; the Display indicates 8.8.8.8.
Resets to factory defaults
ON = antenna for foot switch is activated
OFF = antenna for foot switch is deactivated
34