Herunterladen Diese Seite drucken

CASO DESIGN VacuChef 40 Bedienungsanleitung Seite 44

Kammervakuumierer

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
A complete vacuum
is not being created
in the bag.
The bag is not being
sealed correctly
The bag does not
hold the vacuum
after it has been
sealed
► In the event of technical troubles, faulty devices or missing parts, please contact
Customer Service.
20 Disposal of the Old Device
To protect the environment, it's important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances.
Please take your old unit to the nearest recycling center for safe disposal.
Until it can be disposed of properly, store your old unit away from children.
21 Guarantee
We provide a 24-month guarantee for defects caused by production or material faults,
beginning on the date of purchase. Our guarantee is valid for Germany, Austria and the
Netherlands. For all other countries, please contact us.  
Your legal guarantee claims as per Art. 437 ff. German Civil Code (BGB) will remain
unaffected by this. You may exercise your statutory guarantee rights free of charge. The
guarantee does not cover damage caused by improper handling or use of the product or
defects which have only a minor impact on the product's functionality or value. In addition
to this, the guarantee also excludes parts which are subject to wear and tear; transport
damages insofar as we are not responsible for them and damages caused by repairs
which were not carried out by us.
The open end of the bag is not
completely inside the vacuum
chamber
The bag is defect
There is residue on the welding
and the seal
The sealing bar is overheating
so that the bag melts
Defect sealing bar.
The bag is defective
There are leaks along the
welding seam as a result of
creases, crumbs, grease or
liquids.
PLEASE NOTE
PLEASE NOTE
Position the bag correctly
Select another bag
Clean the welding / seals and
retry once they are dry
Open the cover on the unit and
let it cool down for a few minutes.
Sealing bar needs to be replaced.
Select another bag; wrap paper
around any sharp edges within
the bag.
Open the bag again and clean
the upper internal part of the bag.
Remove any foreign matter that
might be on the welding bar
before sealing.
44

Werbung

loading

Diese Anleitung auch für:

1417