Elite Super Crono Bedienungsanleitung Seite 26

GB
• If the previous adjustment is not sufficient, move
the entire base (G,H), loosening the base fixing
screw and securing it in a more correct position
(fig.28 , 29 and 30).
• Push the bicycle towards the resistance
unit until the rear wheel touches the roller (fig.31).
26
All manuals and user guides at all-guides.com
• Check the stability of the bicycle by pulling and
pushing the top tube of the frame and the saddle.
If the bicycle is not stable, make sure the quick
28
release and its lever are correctly positioned, that
the lever (F) is in the "close" position and the
clamping system adjustment has been correctly
carried out (fig.14/15).
• Fasten the computer support to the handlebar
as seen in illustration 10, paying attention that the
support of the computer is facing the front.
29
• If the diameter of the handlebar does not allow
the clamping of the computer support, you can
remove one or both gum parts of the clamp band,
making it compatible with oversized handlebars.
30
31
32
33