Elite Super Crono Bedienungsanleitung Seite 23

• Tighten down the screws (N) (fig.9).
FITTING THE BICYCLE
• Make sure the quick release of the bicycle rear
wheel is properly fixed.
• Turn the lever (F) to the "open" position
(fig.10).
• Release the ring (D) by unscrewing it (fig.11).
• Put the bicycle in position, inserting the left end
of the rear quick release in the left bushing (C)
All manuals and user guides at all-guides.com
(fig.12). For safer clamping of the bicycle on the
stand, make sure the lever of the quick release is
horizontal (fig.13).
9
• Close the lever (F), making sure it starts pres-
sing the quick release inside the predefined work
10
area; between 30° and 45° (fig. 14 and fig.15).
11
GB
12
13
14
15
23