Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Characteristics - clage SX 50 Installationsanleitung

Vorschau ausblenden Andere Handbücher für SX 50:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB

TECHNICAL CHARACTERISTICS

For the technical characteristics of the appliance, please refer to the information provided on
the data plate.
Maximum working
pressure
Absorbed power
Power supply
voltage
Mains frequency
Capacity
Weight
Max working pressure
Heating time to approx. 85° C
with cold water inlet
temperature 15° C
This appliance complies with the provisions set forth in the EEC/89/336
EMC directive on electromagnetic compatibility.
INSTALLATION NORMS (for the installer)
WARNING! Follow the general warnings and the safety norms listed at the
!
beginning of the text and keep to all the instructions given under all circumstances.
The installation and set-up of the water heater must be carried out by a competent
person in conformity with the applicable norms in force and with any provisions set
forth by local authorities and public health bodies.
The appliance heats water to a temperature below boiling point. It must be linked up to a mains
water supply according to the appliance performance levels and capacity.
Before connecting the appliance, it is first necessary to:
- Check whether the characteristics (please refer to the data plate) meet the customer's
requirements.
- Make sure the installation conforms to the IP degree (of protection against the penetration
of liquids) of the appliance according to the applicable norms in force.
- Read the instructions provided on the packaging label and on the appliance data plate.
Installing the appliance
This appliance was designed to be installed only inside buildings in compliance with
the applicable norms in force. Furthermore, installers are requested to keep to the
following advice in the presence of:
18
Model
M a d e i n I TA LY
1 kW hour
2 kW hour
3 kW hour
4 kW hour
6 kW hour
MODEL
litri
50
80
kg
21
26
bar
4,3
6,8
2,1
3,4
1,4
2,3
1,1
1,7
0,7
1,1
Date of
manufacture
Capacity
Type of tank protection
Current intensity
Approvals
Degree of protection
against water
100
120
150
33
42
47
6
8,5
10,3
12,8
4,3
5,1
6,4
2,8
3,4
4,3
2,1
2,6
3,2
1,4
1,7
2,1

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sx 100Sx 150Sx 80Sx 120

Inhaltsverzeichnis