Description Of Appliance; Technical Specifications - clage S 5-U Montageanleitung

5. Description of appliance

15 min
10 min
5 min
0
40 °C 50 °C 60 °C 65 °C

6. Technical specifications

40 °C
15 l
Type
10 l
5 l
Art. No.
0
Capacity
40 °C 50 °C 60 °C 65 °C
Energy efficiency class
1
Daily power consumption
1+
2
value of „smart"
1
Protection class acc. to VDE
Packaging dimensions
Type of system (nom. pressure)
Inner container
Insulation
Nominal loading at 230 V
Water connections
Mixed water capacity
3
Temperature range
Temperature selection
Heating time from 10 °C to 65 °C
Stand-by power consumption
Empty / Filled weight
Type of protection acc. VDE
1 The declaration complies with the EU regulation No 812/2013. The product data sheet is attached at the end of this document.
2 EN 50440
3 Mixed temperature 40 °C with hot temperature 65 °C and cold temperature 12 °C
4 Stand by power consumption with 65 °C/24 h
• The storage water heater S 5-U is a open (non-pressurized) water heater for the decen-
tral hot water supply of a single outlet, e.g. kitchen sink.
S5-U • The storage water heater constantly keeps the water volume available at the preset
temperature. If the entire volume of the water heater is drawn off, recovery time is as
shown in the diagram.
• Never pressurize the water heater. Under no circumstances must the spout be
85C
blocked. Only use CLAGE-jet control for pressureless storage water heaters.
• The formation of calcium could block the outlet resulting in pressure being exerted
on the water heater.
The first signs for calcification are boiling noises and a reduced flow of water. If so,
have the system and fittings decalcified by a professional.
• While the system is heating up, water will drip from the spout.
S5-U
l
85 °C
kWh
mm
kW
inch
l
°C
min
kWh
1 + 4
kg
S 5-U
42052
5
A
2,49
0
1
215 × 265 × 425
open (non-pressure)
Polypropylene
Polystyrene (without CFCs)
2,0
3 /
8
9,1
≤ 85
infinitely variable
10
0,27
3,5 / 8,5
IP 24
11
CLAGE
EN