Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
Function Description
The dosing pump series
pumps mounted in a free discharge point, suitable for use with uncontaminated, non-abrasive
dosing media.
An asynchronous motor acts as a drive which has an integrated fan for better cooling. An
additionally installed thermal protection switch switches the pump off in the case of overheating
and switches it back on again after a certain cooling phase.
A built-in spring actuator ensures a low noise level and extends the working life of the pump.
4.1
Actuation
The TurboPUMP is controlled via the voltage supply from the mains supply cable.
This pump
applied!
Ensure that you make sure that all hose connections are fully mounted so that no dosing
CAUTION
agent can escape in an uncontrolled manner and injuries caused.
Always observe legal regulations and the corresponding product datasheet when using
dangerous or aggressive chemicals.
417101113_TurboPUMP
TurboPUMP
is a range of electric motor-driven membrane dosing
does not have an On/Off button
- 19 -
and starts immediately the mains supply voltage is
Rev. 7-11.12
Werbung
