ECOLAB TurboPUMP Bedienungsanleitung Seite 21

5.4 Mounting on the wall
5.4.1 Mounting the console
 The console (Article No. 207002) is mounted on the wall using fastening material
(Figure. 5.4, Pos. 1-3, contained in the scope of supply).
NOTE
The console is not contained in the scope of supply of the
Fig. 5.3
 The console can be extended as required to the right to mount pumps in a row.
The console must be fixed to the neighbouring console by fastening screws (Pos. 4).
Fig. 5.4
Pos. Designation
1
Fastening screw
2 Washer
3 Dowel
4
EJOT-PT screw
5.4.2 Assembling the pump
The TurboPUMP
Fig. 5.5
Example:
consoles fitted with pumps
3
WARNING
Ensure that the retaining collar on the unlocking spring is securely engaged at the pump foot.
417101113_TurboPUMP
Distance between holes for the wall console (hole diameter: 8 mm)
upper fastening
is to be mounted on the console according to the principle of "click and fix".
TurboPUMP
lower fastening
- 21 -
(see accessories).
Rev. 7-11.12