ECOLAB TurboPUMP Bedienungsanleitung Seite 16

1 General points
This technical manual contains all instructions required concerning installation, commissioning,
maintenance and repair of the membrane dosing pump of the model series TurboPUMP.
The German sections of this manual constitute the ORIGINAL OPERATING MANUAL and take
legal precedence.
NOTE
All other languages are translations of the ORIGINAL OPERATING MANUAL.
If you have questions, please contact us as outlined in chapter
Manufacturer".
1.1 EBS Article numbers
Within this manual article numbers, and EBS numbers are represented. EBS numbers are
ECOLAB internal article numbers and used only "concern internal".
1.2 Transport damage
CAUTION
If the
installed!
WARNING
1.3 Extent of Warranty
A warranty concerning operating safety, reliability and performance of this pump will only be given
by the manufacturer under the following conditions:
• Assembly, connection, installation, maintenance and repair is carried out by qualified and
authorised specialists.
• The membrane dosing pump is used according to instructions given in the operating
instructions included in the scope of delivery.
• Only original equipment spare parts are used for repairs.
• Any right to claim under warranty will be lost if the pump housing is opened.
In addition, the general warranty and service conditions of the company
Ecolab Engineering GmbH
1.4 Contact address / Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83309 Siegsdorf
Tel. (+49) 86 62 / 61-0
Fax. (+49) 86 62 / 61-2 35
E-Mail:
engineering-mailbox@ecolab.com
417101113_TurboPUMP
TurboPUMP is found to have been damaged when it is unpacked, it should not be
are applicable.
- 16 -
1.4 "Contact address /
Rev. 7-11.12