Swim & Fun 1401 Bedienungsanleitung Seite 145

7. Instructions for use
The buttons and their functions
Press the following buttons and combinations in order to:
Operating modes
Press A to select Powerfull, Smart or Silent mode
Powerfull
Smart
Silent
Deactivation of child lock - only applies to newer models
To operate the display, first unlock the display by making a long press on the buttons A and B. The
display automatically locks again after 30 seconds of inactivity.
MV-1401-1402-1403-1404-01-2024 . © All rights reserved Swim & Fun ApS
Press the button to start or turn off the heat pump
Press the "Up" or "Down" button to set the water temperature
Press shortly the "Up" and "Down" button at the same time to check the "water
in" temperature, "water out" temperature and set temperature.
Use the buttons to navigate in the advanced settings
Press the button to change the working mode: Powerful, Silent and Smart. The
default mode is Smart mode
Is also used to save settings
Press the settings button for 2 seconds to enter the advanced settings
Use the settings button to select options and to exit
When selecting this mode the heat pump will run with 'full output' .
If you choose Smart, the heat pump will only operate at 'Medium output' and 'Full
output'
When you select the Silent function, the heat pump will only operate at 'Medium
output' and 'Minimum output'
A
A
B
C
UK
145