Advanced Settings Menu - Swim & Fun 1401 Bedienungsanleitung

UK
Note
Applies only to newer models that have a lock icon on the display - C.

Advanced settings menu

Press B or C button to navigate in the advanced settings menu. Press the
settings button A to select settings in the menu.
Heating / Cooling / Auto mode
Select the heating/cooling/auto mode setting A in the menu and press the settings button B. Press
C or D to choose between Heating, Cooling or Auto mode. Press the settings button B to exit. The
default mode is Heating.
Working mode
Heating/Auto mode
Cooling
How the Auto Mode works
NO Condition
1 When the heat pump
starts
When the heat pump is
running
146
A B
A B
Temperature range
6-41°C
6-35°C
T1=Water inlet temperature /Tset= set temperature=28°C
Current working sta-
tus
Startup
Heating mode
Standby
Cooling mode
Standby
MV-1401-1402-1403-1404-01-2024 . © All rights reserved Swim & Fun ApS
C
C D
Water inlet Temperature
T1≤27°C
T1≥29°C last for 3 min-
utes
T1≥30°C
T1=28°C, last for 3 min-
utes
T1≤27°C, last for 3 min-
utes
Working mode
Heating mode
Standby
It switches to cooling
mode
Standby
It switches to heating
mode