Parkside PKGA 20-Li C2 Originalbetriebsanleitung Seite 42

GB MT
sure that the holes in the sanding sheet
are­placed­above­the­openings­in­the­
sanding­plate.
Removing sanding sheet
2.­ Simply­pull­the­sanding­sheet­(31)­off­
the­delta­sanding­plate­(30).
Sanding
•­ Move­the­appliance­against­the­work-
piece­once­it­is­switched­on.
•­ Clean­the­sanding­plate­before­you­at-
tach a sanding sheet.
•­ Only­work­with­sanding­sheets­in­per-
fect condition to achieve good sanding
results.
•­ Work­using­low­and­even­pressure.­
This­protects­the­appliance­and­the­
sanding sheet.
• Do not use the same sanding sheet to
sand­different­materials­(e.g.­metal­
and­then­wood).
Selection of sanding sheet
Grain size P Application
for­pre-sanding­rough­wood­
P 60
surfaces
P­80­/­120 for­plain­sanding
for­fine­sanding­of­primed­
P 240
and­painted­surfaces
Scraping
•­­ Use­a­high­oscillation­rate­when­scrap-
ing.
•­­ Work­using­low­pressure­and­at­a­low­
angle in order not to damage the sub-
strate material.
42
Cleaning/Maintenance
­ Repair­and­servicing­work­not­
described in this manual should
always be carried by our Service
Centre.­Use­only­original­parts.
Switch off the device and remove
the battery from the device before
working­with­or­transporting­it.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not im­
merse it in water. Electric
shock hazard!
•­ Keep­clean­the­ventilation­slots,­motor­
housing­and­handles­of­the­appliance.­
Use­a­damp­cloth­or­a­brush.­
Do not use cleaning agents or solvents.
You­may­otherwise­irreparably­dam-
age­the­appliance.­
Maintenance
•­ The­equipment­is­maintenance­free.
Storage
•­ Store­the­device­in­a­dry­place­well­out­
of reach of children.
•­ Store­the­equipment­between­0 °C­and­
45 °C.­During­storage,­avoid­extreme­
cold or heat so the battery does not
lose­power.
• Remove the battery before storing the
unit­for­longer­periods­of­time.