Parkside PKGA 20-Li C2 Originalbetriebsanleitung Seite 34

GB MT
e) Do not use damaged or altered
batteries. Damaged or altered bat-
teries­can­be­unpredictable­and­lead­
to­fire,­explosion­or­risk­of­injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures­over­130 °C­can­cause­
an­explosion.
g) Follow all instructions for charg­
ing and never charge the bat­
tery or the battery­powered
tool outside the temperature
range stated in the operating
instructions. Incorrect­charging­or­
charging­outside­the­permitted­tem-
perature­range­may­destroy­the­battery­
and­increase­the­risk­of­fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us­
ing only identical replacement
parts. This will ensure that the safety
of­the­power­tool­is­maintained.
b) Never repair damaged batter­
ies. All­battery­repairs­should­be­car-
ried out by the manufacturer or author-
ised customer service centres only.
safety
Additional
Warning! The processing
of hazardous materials
(e.g. paint containing lead or
material containing asbestos)
is hazardous to the user and
bystanders and is therefore
prohibited.
Warning! Sawing and san­
ding can result in dust. Al­
ways wear safety goggles,
safety gloves and respiratory
34
instructions
protection. If possible, attach
a dust extraction system.
1) SPECIAL SAFETY INFORMATION
FOR THE CORDLESS
COMBINATION TOOL
• Hold the electric tool by the in­
sulated handle surfaces when
performing work where the
screw may come into contact
with hidden wiring. Contact­of­the­
screw with a live wire can also cause
a­charge­in­metal­parts­of­the­appli-
ance­and­result­in­an­electric­shock.­
• Use suitable detectors in order
to find hidden supply lines or
ask the local utility company.
Contact­with­electrical­cables­can­lead­
to­electric­shock­and­fire,­contact­with­
a­gas­pipe­can­result­in­an­explosion.­
Damage­to­a­water­pipe­can­lead­to­
property­damaged­and­electric­shock.
• Secure the workpiece.­A­work-
piece­that­is­retained­with­clamping­
appliances­or­a­vice­is­held­more­se-
curely than with your hand.
• Be very careful when handling
tools such as saws, scraper
blades and drills.­These­are­sharp­
and­present­an­injury­hazard.
• Wear safety gloves when
changing attachments. This ena-
bles­you­to­avoid­injuries­if­the­appli-
ance­attachment­has­heated­up­after­
use.
2) SAFETY INFORMATION FOR
SAWING BACK AND FORTH
• Hold the electric tool by the in­
sulated gripping surfaces when
performing work in which the
cutting tool may come into con­