Sharp VL-C780S Serviceanleitung Seite 193

:
6. Other output action
. Lighting of talent tally LED
At starting REC, according to the data sent from the VCR microcomputer, the LED (D501) is lit by means of
the camera microcomputer output (52) TALLY terminal.
+5V
IC655
CAMERA MICRO-
: COMPUTER
.
goad Figure 5-6 (a).
Table 5-6 (a).
. Lighting of full auto LCD
as
According to the state of camera micrcocomputer input (63) GREEN KEY set by the green lock switch a ye
(SW001) and the data sent from the VCR microcomputer, the LCD is driven by means of the camera
microcomputer output (16) LCD + and (17) LCD-.
VCR microcomputer data ( and @® output
With tape capable of recording Lighting
Without tape capable of recording Flashing
Without tape capable of recording Flashing
Table 5-6 (b).
LCD +
IC655 LCD —
CAMERA MICRO-
COMPUTER
Figure 5-6 (b).
1 rT Rt enh op er arn t e r e
LCD +
LCD —
32
em 1 a (kD [LT
ae
1
Putting out —>|<—_ Lighting
I
70~200 Hz
Figure 5-6 (c).