Parkside PFBS 12 C7 Originalbetriebsanleitung Seite 7

NOTE
► The vibration emission values and the noise emission values given in these instructions
have been measured in accordance with a standardised test procedure and can be
used for comparison of the power tool with another tool.
► The specified total vibration values and the noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power tool is being used, and in particular the
kind of workpiece that is being worked, the vibration and noise emission values can
deviate from the values given in these instructions during actual use of the power tool.
► Try to keep the load as low as possible. Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working time. Wherein all states of operation
must be included (e.g. times when the power tool is switched off and times where the
power tool is switched on but running without load).
General power tool safety warnings
WARNING!
► Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
│ GB │ IE
■ 4 PFBS 12 C7