Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RSP3 installation and user's guide
www.renishaw.com
Safety
CAUTION: Before unpacking and installing the REVO system, the user should carefully read the safety instructions below and
ensure that they are followed at all times by all operators.
The RSP3 range of probes is only to be used with the Renishaw REVO head.
Operators must be trained in the use and application of the REVO system and accompanying products, in the context of the
machine it is fitted to, before being allowed to operate that machine.
Permanent magnets are used in some components of the REVO system and associated products. It is important to keep them away
from items which may be affected by magnetic fields, e.g. data storage systems, pacemakers and watches etc.
RSP3 LED emissions
The RSP3 range of scanning probes incorporate embedded high power LED sources and should not be used in the event of serious damage
to, or rupture of, any part of the RSP3. In such cases IMMEDIATELY disconnect the power source, remove and do not attempt to re-use the
parts. Contact your supplier for advice.
RCP TC-2 and RCP TC-3
The method of interrupting power is to disconnect the power cable or turn off the supply.
Issued 10 2019
7
Werbung
