Renishaw RSP3 Installations- Und Bedienungsanleitung Seite 20

RSP3 installation and user's guide
www.renishaw.com
RSP3-6
Characteristic
Probe attributes
Measurement range
Overtravel range
X, Y
+Z
-Z
Resolution
Weight
Effective stylus length range
RSP3-6 + RSH3-6c-500
RSP3-6 + RSH3-6c-600
RSP3-6 + RSH3-6-600
RSP3-6 + RSH3-6-700
RSP3-6 + RSH3-6-800
Mounting
Crash protection
±X, ±Y, ‐Z
+Z
Change rack options
RCP TC-3
RCP2
Interface options
Issued 10 2019
Requirements
2-axis scanning (X,Y) and 3-axis touch-trigger (X,Y,Z)
±0.5 mm deflection in all directions in all orientations
2 mm
1.7 mm
1.2 mm
Capable of <0.1 μm
300 g (10.58 oz) (excluding stylus holder and stylus)
EWL 348 mm (13.70 in) using M2 star centre
EWL 448 mm (17.64 in) using M2 star centre
EWL 456 mm (17.95 in) using 10 mm stylus
EWL 556 mm (21.89 in) using 10 mm stylus
EWL 656 mm (25.83 in) using 10 mm stylus
Magnetised kinematic coupling
Via break out of probe or stylus holder
Via integral bump-stop design
Thermally controlled change port for probe changing only
This single port unit mounts on the MRS / MRS2 rack
For stylus holder changing only
This single port unit mounts to the MRS or MRS2
UCC S5
20