Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RSP3 installation and user's guide
www.renishaw.com
Port spacing for RSP3-6
CAUTION: It is imperative that the RCP TC-3 port used to store RSP3-6, and its adjacent ports, are positioned according to the
guidelines below. Failure to follow these guidelines could result in REVO colliding with the RSP3-6 counterbalance arms.
Positioning RSP3-6 next to RCP2
Use the length labelled '45' as a spacer when positioning an RCP TC-3 containing RSP3-6 next to an RCP2.
Positioning RSP3-6 next to RCP TC-2, RCP TC-3 or SFP1 calibration plate
Use the length labelled '25' as a spacer when positioning an RCP TC-3 containing RSP3-6 next to an RCP TC-2, RCP TC-3 or an SFP1
calibration plate.
Issued 10 2019
40
Werbung
