Parkside PTSG 140 D2 Originalbetriebsanleitung Seite 19

Warning: The vibration and noise
emissions may deviate from the
specifi ed values during actual use of the
power tool, depending on how the power
tool is being used and, in particular, what
kind of material is being worked on.
Safety measures for the protection of the
operator are to be determined that are ba-
sed on an estimate of the actual vibration
load under the real operating conditions
(for this, all parts of the operating cycle
are to be taken into account, for example,
times in which the electric tool is turned off,
and those during which it is turned on but
running without a load).
Notes on safety
CAUTION! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of
injury and fi re.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.
Symbols and icons
Symbols on the device:
Warning!
Read the manual!
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Wear eye and hearing protection
Wear respiratory protection.
Wear safety gloves.
Protection class II
(double insulation)
Sanding disc direction
of rotation
Electrical machines do not belong
with domestic waste
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Connect the machine to the power
supply.
Pull out the mains plug.
Notice symbol with information on
how to handle the device properly.
General notes on safety
Caution! When using power tools,
observe the following basic safety
measures for the prevention of
electric shocks and the risk of injury
and fi re: There is a risk of injury.
General Safety Directions
for Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
GB
19