Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Scope of delivery
Unpack the device and check for complete-
ness. Dispose of the packaging material
properly.
-
Disc sanding device
-
Sanding disc
-
Screw clamp
-
Angle stop
-
6 x sanding paper
- 2x granulation 80
- 2x granulation 150
- 2x granulation 240
-
Angle adapter and adapter for external
dust extraction
-
Operating instructions
Description of functions
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Sanding disc
2 Speed regulator
3 On/off switch
4 Mains plug
5 Receptor
6 Screw
7 Angle scale
8 Sanding table
9 Slot
10 Angle stop
10a Rail
10b Screw
11 Angle adapter
12 Adapter for external dust
extraction
13 Screw clamp
14 Sanding paper
18
Technical Data
Disc sander ................PTSG 140 D2
Rated input voltage ..........230 V~, 50 Hz
Power input ............... 140 W (S6 30%)*
Power consumption P
Idling speed (n
) ..............max. 4000 min
0
Safety class ..................................... II
Protection category...........................IPX0
Weight ..................................... 1.98 kg
Sanding disc diameter ................ 125 mm
Sound pressure level
(L
) ..................... 65.99 dB; K
pA
Sound power level
(L
) measured ..... 78.99 dB; K
WA
Total vibration value (a
* Operating mode S6 30%: Continuous opera-
tion with intermittent load (cycle time 10 min).
In order not to heat the motor more than permit-
ted, the motor may only be operated for 30%
of the cycle time with the stated nominal power
and must then continue running for 70% of the
cycle time without a load.
** Operating mode S1: Continuous operation with
constant load
Levels of noise were determined according
to the norms and regulations in the decla-
ration of conformity.
Wear hearing protection.
The specifi ed total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specifi ed total vibration value and the
stated specifi ed noise emission value can
also be used for a provisional assessment
of the load.
........100 W (S1)**
0
= 3 dB
pA
= 3 dB
WA
) .........
2.5 m/s
h
-1
2
Werbung
