Ydk01, Ydk01-0D: Getting Started - Sartorius YDK01 Betriebsanleitung

6
YDK01, YDK01-0D:
Getting Started
You can use the density determination kit,
YDK 01 or YDK 01-0D, with the following balances:
– ME series balances
– BA balances with a readability < 0.1 mg
– BP, CPA, CP, LA balances with a readability
< 0.1 mg, LE225D
– MC balances with a weighing range of 210 g and
up (Micro series)
– RC balances (Research series)
Preparing the Bar Frame
You must mount the adapter before the bar frame
can be placed on the balance.
Please use the adapter that is appropriate for the
balance you are using.
Approx. dimensions:
12 mm d, height 16.5 mm
– BA, BP*, MC and RC balances
12 mm d, height 25.5 mm
– BP**, CPA, CP, LA balances with a readability
< 0.1 mg, LE225D
8 mm d, height 41.3 mm
– ME balance with gasket
– Compensating disk for ME235S/P and ME254S
model versions dated earlier than 2005
* = BP 210 D, BP 300 S, BP 210 S, BP 160 P,
BP 110 S
** = BP 211 D, BP 301 S, BP 221 S, BP 161 P,
BP 121 S