Sartorius YDK01 Betriebsanleitung Seite 10

10
LA/LP Balances, Except Models LA/LP3200D and
LA/LP1200S
§ Place the components on the balance
in the following order:
– Short adapter
– Bar frame
$ The wedge-shaped opening at the top of the bar
frame should face the direction from which the
sample holder (pan hanger assembly/glass plummet)
will be placed on the balance
LA/LP3200D, LA/LP1200S Balances
§ Place the components on the balance
in the following order:
– Short adapter
– Compensating disk
– Bar frame
$ The wedge-shaped opening at the top of the bar
frame should face the direction from which the
sample holder (pan hanger assembly/glass plummet)
will be placed on the balance
LA/LP Balances with the YDS01LP Draft Shield
§ Place the components on the balance
in the following order:
– Long adapter
– Compensating ring: only for LA/LP3200D,
LA/LP1200S
– Bar frame
$ The wedge-shaped opening at the top of the bar
frame should face the direction from which the
sample holder (pan hanger assembly/glass plummet)
will be placed on the balance