Herunterladen Inhalt Inhalt Diese Seite drucken

Find The Vacuum Cleaner" Function; Setting Of Sharing; Firmware Update; Troubleshooting - eta AURUM PRO Gebrauchsanleitung

Applikation eta smart
Vorschau ausblenden Andere Handbücher für AURUM PRO:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 70
• After the replacement of one of the
components, it is necessary to reset it to
start the deduction of percents from 100%.
2
• To do it, click on the corresponding
component first.
• Then, click on „Confirm" to confirm the
reset.
REMARKS:
• The lifetime of each component is counted down and is given
in % and hours/minutes (how much lifetime is left).
• After the lapse of the service life of a component, we recommend
that you replace this component to keep in the best way efficiency of
suction and to prevent the vacuum cleaner from possible damage.
19. „FIND THE VACUUM CLEANER" FUNCTION
• Go to settings „
• Click on
„Find the
1
• Then click on „Confirm".
• After it, the vacuum cleaner will warn you
acoustically to specify its position.
REMARKS:
• This function can be used, especially, if the vacuum cleaner gets
jammed in whatever part of the house (for example, under furniture).

20. SETTING OF SHARING

1
2
".
robot".
3
REMARKS:
• Users, with which you share your vacuum cleaner, may also control it,
• A user, to whom you want to set sharing, has to create his/her own
• Click on the pencil symbol
in the right
upper corner of the main screen.
• Select
„Share
Device" in menu.
1
• Click on „Add".
2
• After that, choose a country and enter
e-mail of the account with which you want
to share the vacuum cleaner.
• Click on „Done" to exit.
For troubleshooting, visit the advisory page www.etasince1943.com/robot
but have partially limited possibilities.
account in the ETA SMART application.

21. FIRMWARE UPDATE

The vacuum cleaner has software in its inner
memory named Firmware. If a newer version
has been issued, it is necessary to update it.
• On the main screen, click the pencil symbol
in the top right corner.
• Select
„Device
Update".
If a new version is available, confirm update.
Having finished updating, place the vacuum
cleaner into the charging station. The vacuum
cleaner has to be connected to a Wi-Fi
network with available Internet connection.
• If you require to check automatically new
available versions, you may switch-on the
„Automatic
Updates" option.

TROUBLESHOOTING

ENG
ENG - 41

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Eta624190000

Inhaltsverzeichnis