GB
II. EQUIPMENT AND ACCESSORIES (Fig. 1)
A – vacuum cleaner
A1 – ON/OFF button
A2 – suction power control
A3 – operation signal lights and charging
lights
A4 – container lock button
A5 – handle
B – dust container
B1 – HEPA filter
B2 – separator
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories. Remove all
possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1. In
accordance with the required use, choose suitable accessories (C1, C2, C3) or use the
vacuum cleaner without accessories C (Fig. 5).
CHARGING THE ACCUMULATOR
Turn the vacuum cleaner off prior to charging! According to Fig. 3, place the vacuum cleaner
on the charging stand and connect the adapter to the power supply. The standard charging time
is approx. 5 hours. The status and progress of charging is indicated by indicator A3.
Flashing red
Lit in white
– Let the vacuum cleaner recharge as soon as its suction performance is weaker.
– When using the vacuum cleaner for an extended period of time or in a hot environment, the
accumulator might be too hot for charging. Let the accumulator cool down prior to charging.
– If used daily, do not unplug the adaptor from the socket. This will make sure that the
appliance is fully charged at all times. The battery is protected from overcharging. If you
are going to be absent for a longer time (more than one day), unplug the adaptor from
the mains so as to optimize the battery life.
Operation signal lights and charging lights (A3)
Accumulator is charging.
Accumulator is charged / Indication of operation.
C – accessories
C1 – crevice nozzle
C2 – brush
C3 – turbo brush
C4 – removable brush
C5 – brush lock
D – charging stand
D1 – adapter
D2 – opening for mounting on the wall
D3 – charging port
D4 – space for small accessories
(crevice nozzle, brush)
Warning
22
/ 46